How bike gears work

Why does one gear make hills easy and another make you fast? It all comes down to counting teeth.

1 · A chain is a belt with holes

Your pedals turn the big front ring. The chain wraps around it and around a small rear cog bolted to the back wheel. Every link that leaves the front ring arrives at the back, so both gears move the same number of teeth in the same time.

Turn pedals
Teeth moved: Rear cog turns:

Watch the marked teeth: one full pedal turn moves 48 teeth, which spins the 16-tooth cog three times.

2 · The ratio is just division

Teeth in front ÷ teeth at the back = how many times the wheel turns for each pedal stroke. A big ring and a small cog give a high gear: lots of wheel turns, heavy to push. A small ring and a big cog give a low gear: easy, but slow.

Front Rear
Ratio:

3 · From ratio to speed

Multiply the ratio by how far the wheel rolls in one turn (its circumference, about 2.1 m on a road bike) and by how fast you pedal — your cadence. Most riders are comfiest around 80–90 turns a minute, which is why we shift: to keep cadence steady while speed changes.

Cadence Front ring

Each bar is one cog on an 11-speed cassette (11–32 teeth). Tap a bar to pick that gear.

4 · Shifting, in 3D

The derailleur (“derail-er”) is a spring-loaded cage that shoves the moving chain sideways until it drops onto the next cog. The long cage takes up slack, because a big cog needs more chain than a small one. Drag to look around.

Simplified: real chains have rollers and plates, and real cassettes have ramps cut into the teeth to help the chain climb.